Peaty's RimJob rimtape

• An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.
• Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.
• The tape comes on 9meter rolls in four different size options - 21mm, 25mm, 30mm and 35mm.
• One 9 meter roll will approximately: 5x 26" Rims / 4x 27.5" Rims / 4x 29" Rims

Fitting Instructions:

• Remove tyre and any old rim tape
• Clean and degrease rim thoroughly
• Ensure rim is completely dry before application
• Press tape firmly into the centre of the rim and smooth out to the edges, removing ny trapped air
• Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
• Use a small spike to pierce the tape in the centre of the valve hole
• Remove dust cap and push valve through the valve hole
• Apply lock ring tightly by hand, ensuring there are no air gaps
• Refit tyre, add Peaty’s Tubeless Sealant, inflate tyre
• Ride!